QRMaxUltra Honeycomb Alpha Plate

  • Model: QRMaxUltraHCAlpha
  • Shipping Weight: 305g

 Ask a Question 

£47.00

Add to Cart:

This QRMaxUltra Plate is designed to mount to the base of the Honeycomb Alpha Yoke (not Bravo - see QRMax non Ultra products) to enable quick mounting and dismounting on your rig.

  • QRMaxUltra 12mm Plate
  • QR Honeycomb Adapter Plate
  • 4x M4x12mm s/s CSK Skt Screws

You will need a QRMaxUltra Base Plate (sold separately) to use this kit.

Downloads:
Mounting Instructions
Drilling Guide

Attention: If you have the earlier models that come with the first edition of the Honeycomb Alpha/Bravo Dual Mount Base Plate, the through holes will not be present and you will have to drill them and countersink them yourself to enable you to mount to the QRMax Honeycomb Plate. A drilling guide is available to download above.


Note: This item is made from 3D printed PLA+ and can withstand temperatures up to 50°C without deformation or softening. There will be obvious print lines on this product due to the nature of 3D printing. Please use the contact us form if you require a higher temperature material and we will endeavour to accommodate your requirements at an extra cost.


This product was added to our catalog on Saturday 02 July, 2022.

Your IP Address is: 18.208.187.128

Copyright © 2022 Project Immersion